| MAIN | SHOP | VIDEO: 15in1 | AK47 | LR300 | M249 | HandMade LMG | MP5 | THOMPSON | SMG | M39 | SAR | Prototype17 | M92 | Python | P250 | Revolver & Nailgun | How to use scripts in GHUB to avoid getting banned | Как использовать скрипты в GHUB, чтобы не получить бан | How to 100% protect against anti-cheat with REMOTE PLAY on STEAM | Как 100% защититься от античита с помощью REMOTE PLAY в STEAM |
ОПИСАНИЕ НА РУССКОМ НИЖЕ!!!
Script - No Recoil for Logitech mice in the game RUST eliminates the vertical recoil of automatic and semi-automatic weapons, almost entirely. This increases accuracy and, therefore, extends the range at which you can engage your opponents. Your mouse should be supported by the GHUB program.
DEAR BUYERS, CAREFULLY READ THE PRODUCT DESCRIPTION, IT IS IMPORTANT!!!
IF YOU HAVEN'T FOUND THE RIGHT MACRO ON SALE. THEN I CAN MAKE YOU A MACRO FOR A CERTAIN PAYMENT.
Script were written for the sensitivity settings of the mouse in the game - 0.8, FOV - 70, or you can use FOV - 90, then the sensitivity settings of the mouse in the game should be - 0.6. Sensitivity multiplier when aiming down sights - 1.0.
Attention!!! There is a possibility that for technical reasons ("Input Lag" - affecting the operation of macros), or when changing the FOV, or when modifying weapons, if the sight pulls down during shooting, then reduce the values in the mouse sensitivity settings in the game, if up, then increase.
If the sensitivity settings of the mouse in the game are too large for you, or too small, then you can change the dpi of your mouse, this will not affect the operation of the scripts.
Attention!!! For convenient use of the script, the keyboard must have a numlock and a capslock to indicate different modes.
Sequence of indicator lights operation:
After the 1st press of the control buttons to activate the recoil control mode for the first assigned weapon, the Num Lock indicator on the keyboard will light up.
The 2nd press will turn off Num Lock and the Caps Lock indicator will light up.
The 3rd press will return to the first weapon, Caps Lock will go off, and Num Lock will light up again.
When switching between different recoil control modes for different weapons, the Scroll Lock will also flash and go off.
If you activate additional modes available in the script using the 4th button, then Scroll Lock will flash and remain active until you switch to the recoil control mode for another weapon.
Attention!!! When using the button combination: left Ctrl + 5th mouse button, the indicator lights are not active. This is due to the peculiarities of the Ctrl button's functioning.
Script Management:
How to switch between different recoil control modes:
Up to 2-3 weapons can be assigned to the control buttons. For example, 2 recoil control modes for different weapons and script deactivation can be assigned to the
5th mouse button. For the key combination: left Ctrl + 5th mouse button, 3 weapons can be assigned.
If two weapons are assigned to the control buttons, the first press activates the recoil control mode for the first specified weapon.
The second press switches to the second weapon.
The third press returns to the first weapon. If three weapons are assigned, the third press switches to the third weapon, and the fourth press switches back to
the first weapon.
Sequence of using the keyboard and mouse button combinations:
For instance, if the combination of the left Shift and the 5th mouse button is used, you press and hold down the left Shift key, then click the 5th mouse button.
This will activate the required mode, and you will be notified about its activation through the keyboard's indicator lights: Num Lock, Caps Lock, Scroll Lock.
After clicking the 5th mouse button, release the keyboard button.
A full description of enabling the necessary recoil control modes and other modes in the script.
Attention!!! Recoil is removed only with the right mouse button pressed and the left mouse button pressed. If you do not press the right button, the left button works in its normal mode.
In the game settings where shooting is, you need to add a keyboard button - Insert. ATTENTION, THERE IS A RISK OF A BAN
AND HOW TO AVOID IT!!!
If you create a profile for the game in the Logitech Gaming Software program or in GHUB and specify the path to the " exe "file of the game in the profile -" RUSTCLIENT.exe" then you will be banned. Therefore, you create a profile without specifying the path to the " exe " files of the game, upload the script to the profile. On the profile, click the right mouse button and put a check mark in the item-Set as persistent, in GHUB in a different way. In the gallery there are two videos showing how to do it all, so as not to be banned. If the program has a game profile (there is a path to the "exe" file of the game), then it is better to delete it, and disable it in GHUB. Players mostly use the desktop profile, as there are no paths to "exe" files in it.
There is a way by which you will never get a ban, but for this you need another computer. In STEAM there is a function REMOTE PLAY, formerly called - Home broadcast. That is, the game will be launched on the first computer, the broadcast will go to the second computer and now on the second computer you will have a logitech mouse with scripts connected and this is 100% anti-cheat protection.
Problems that happen with Logitech and how to solve them!!!
If you have a G304, G305, G602, G603, G604 or similar mouse that cannot be connected to a wire. And if your scripts do not work stably on it. Then you better sell such a mouse and buy yourself another, any wired Logitech, in order to use scripts normally.
If you have a G600 mouse, then you should use only the GHUB program.
The Logitech Gaming Software, or GHUB program is best run with administrator privileges.
Sometimes the GHUB can is buggy, the scripts stop working and you need to reinstall it.
Third-party programs that can use side mouse buttons, for example Diskord, can cause problems with running scripts, keep this in mind.
Profiles for games in GHUB and Logitech Gaming Software, it is better not to use because of possible problems with anti-cheat. It is better to use a desktop profile with the "persistent" attribute.
If you have a lot of profiles, then script interruptions are possible. That is, at some point, there will be no recoil removal.
You should also be familiar with the numbering of the mouse buttons.
New versions of GHUB can have different problems. If you can't solve the problems in the new versions of GHUB, then you need to download the old version of GHUB:
https://drive.google.com/file/d/1ffXNTp5iQZ8woltyIj7CKkeY6Oz6ux3x/view
After installing the old version of GHUB, you immediately need to clear the check mark in - Enable automatic update.
________________________________________
Скрипт – No Recoil для мышек Logitech в игре RUST убирает вертикальную отдачу у автоматического и у полуавтоматического оружия, почти полностью. То есть повышает кучность и тем самым увеличивают дальность поражения противника. Ваша мышка должна поддерживаться программой - GHUB.
УВАЖАЕМЫЕ ПОКУПАТЕЛИ, ВНИМАТЕЛЬНО ЧИТАЙТЕ ОПИСАНИЕ ТОВАРА, ЭТО ВАЖНО!!!
Скрипт был написан под настройки чувствительности мыши в игре - 0.8, FOV - 70, или можно использовать FOV - 90, то тогда настройки чувствительности мыши в игре должны быть - 0.6. Множитель чувствительности мыши при прицеливании должно быть - 1.0.
Внимание!!! Есть вероятность, что по техническим причинам ("Input Lag" - влияющий на работу макросов), или при изменении FOV, или при модифицировании оружия, если прицел во время стрельбы тянет вниз, то уменьшаете значения в настройках чувствительности мыши в игре, если вверх, то увеличиваете.
Если настройки чувствительности мыши в игре слишком большие для вас, или слишком маленькие, то вы можете изменить dpi своей мыши, на работу скриптов это не повлияет.
Внимание!!! Для удобного использования скрипта, клавиатура должна иметь numlock и capslock для индикации различных режимов.
Порядок работы световой индикации:
После 1-го нажатия управляющих кнопок для включении режима убирания отдачи для первого оружия которое назначено на эти кнопки, то на клавиатуре загорится индикатор - Numlock.
2-е нажатие выключит Numlock и загорится индикатор Capslock.
3-е нажатие вернет к первому оружию и Capslock погаснет, Numlock же снова загорится.
При переключение между разными режимами убирании отдачи для разного оружия, то также будет мигать Scrolllock и гаснуть.
Если вы будете включать дополнительные режимы которые есть в скрипте на 4-кнопке, тогда Scrolllock будет мигать и будет оставаться включенным до тех пор, пока вы не переключитесь на режим убирания отдачи для другого оружия.
Управление скриптом:
Как переключаться на разные режимы убирания отдачи:
На управляющие кнопки может быть назначено 2-3 оружия. Например на 5-ю кнопку мыши назначено 2 режима убирания отдачи на разное оружие и выключение скрипта. На сочетание кнопок: левый ctrl + 5-я кнопка мыши назначено 3 оружия.
Если на управляющие кнопки назначено два оружия, тогда первое нажатие на управляющие кнопки включает режим убирания отдачи для первого определенного оружия, второе нажатие на управляющие кнопки переключить на второе оружие. Третье нажатие вернет к первому оружию. Если на управляющие кнопки назначены 3 оружия, то третье нажатие переключить на третье оружие, тогда четвертое нажатие обратно переключить на первое оружие.
Порядок использование комбинации кнопок клавиатуры и мыши:
Например если используется комбинация из левого shift и 5-й кнопки мыши. Нажимаете и удерживаете левый shift в нажатом состоянии, затем делаете клик 5-й кнопки мыши, произойдет включение нужного режима и о включении режима вы будете оповещены световыми индикаторами на клавиатуре: Numlock, Capslock, Scrolllock. После клика 5-й кнопкой мыши, отпускаете кнопку клавиатуры.
Полное описание включение необходимых режимов убирания отдачи и других режимов в скрипте.
Внимание!!! Убирание отдачи происходит только при нажатой правой кнопки мыши и левой. Если правую кнопку не нажимать, то левая кнопка работает в своем обычном режиме.
ВНИМАНИЕ, ЕСТЬ РИСК БАНА И КАК ЕГО ИЗБЕЖАТЬ!!!
Если в программе Logitech Gaming Software, или в GHUB создать профиль для игры и в профиле указать путь к "ехе" файлу игры - RUSTCLIENT.ехе то вас забанят. Поэтому, создаете профиль без указания к пути "ехе" файлам игры, загружаете в профиль скрипт. По профилю клацаете правой кнопкой мыши и ставите галочку в пункте - Установить в качестве постоянного (Persistent), в GHUB по другому. В галереи есть два ролика демонстрирующих как это всё делать, чтобы не быть забаненным. Если в программе есть профиль игры (там есть путь к "ехе" файлу игры), то его лучше удалить, а в GHUB отключить.
Игроки в основном используют профиль рабочего стола, так как в нём нет путей к "ехе" файлам. Подобной проблемы в других играх замечено не было, но я рекомендую, там тоже в целях безопасности лучше использовать профиль рабочего стола.
Есть способ с помощью которого вы никогда не получите бан, но для этого надо ещё один компьютер. В STEAM есть функция REMOTE PLAY, раньше называлась - Домашняя трансляция. То есть игра будет запущенна на первом компьютере, трансляция идет на второй компьютер и вот на втором компьютере у вас будет подключена мышка logitech с скриптами и это - 100% защита от античита.
Проблемы которые бывают с Logitech и как их решить!!!
Если у вас мышка G304, G305, G602, G603, G604 или другая аналогичная, которой нельзя подключить провод. И если у вас скрипты работают не стабильно на ней. То вам лучше продать такую мышь и купить себе другую, любую проводную Logitech, чтобы нормально использовать скрипты.
Если у вас мышка G600, то вы должны использовать только программу GHUB.
Если у вас скрипты работают не стабильно на беспроводной мышке, то необходимо подключить провод и запустить GHUB или Logitech Gaming Software с правами администратора.
Программу Logitech Gaming Software, или GHUB лучше всего запускать с правами администратора.
Иногда GHUB может заглючить, скрипты перестают работать и его необходимо переустановить.
Сторонние программы которые могут использовать боковые кнопки мыши, например Дискорд, могут вызвать проблемы с запуском работы скриптов, учтите это.
Профили для игр в GHUB и Logitech Gaming Software, лучше не использовать из-за возможных проблем с античитом. Лучше использовать профиль рабочего стола с атрибутом постоянный.
Если у вас очень много профилей, то возможны прерывания работы скриптов. То есть в какой то момент не будет убирание отдачи.
Ещё вы должны хорошо знать нумерацию кнопок мыши.
В новых версиях GHUB могут быть разные проблемы. Если не получается решить проблемы в новых версиях GHUB, тогда вам необходимо скачать старую версию GHUB:
https://drive.google.com/file/d/1ffXNTp5iQZ8woltyIj7CKkeY6Oz6ux3x/view
После установки старой версии GHUB, то сразу необходимо в настройках программы убрать галочку в пункте – Включить автоматическое обновление.