| MAIN | SHOP |
VIDEO: 5.56
5.56: zen.yandex.ru/video/watch/625d3ed63e50e11d4bf1fd23
7.62: zen.yandex.ru/video/watch/625d3585ab68c7653f5d3ae4
ОПИСАНИЕ НА РУССКОМ НИЖЕ!!!
Attention!!!
If you are unable to make a purchase, check your email. There will be a message with links to alternative stores where you can complete your purchase.
The "No recoil" script for Logitech mice in PUBG removes most of the vertical recoil for the AKM, ACE32, AUG, BERYL, FAMAS, GROZA, M416, JS9, P90-1x and P90-2x, significantly improving accuracy and thereby increasing the effective range against opponents. Your mouse should be supported by the GHUB software.
The script were written for a 42-round mags, for shooting from a standing position in first person for the mouse sensitivity settings in the game: for 1x - 50, for 2x - 47 (only for P90 with 2x), vertical sensitivity multiplier - 1.0, FOV - 103.
Attention!!! There is a possibility that for technical reasons ("Input Lag" - affecting the operation of macros), or when changing the FOV, or when modifying weapons, if the sight pulls down during shooting, then reduce the values in the mouse sensitivity settings in the game, if up, then increase.
If the mouse sensitivity settings in the game are too large for you, or too small, then you can change the dpi of your mouse, this will not affect the work of scripts.
Script Control:
CapsLock - toggle script on/off. Press the CapsLock key on your keyboard, the CapsLock icon will light up, and the script will activate. Press the CapsLock key again to turn off the script; the CapsLock icon will turn off.
Enabling the required recoil reduction mode for weapons:
AKM - Left Shift + Left Alt + 5th mouse button.
BERYL - Left Alt + 5th mouse button.
M416 - Left Shift + 5th mouse button.
ACE32 - Left Shift + Left Ctrl + 5th mouse button.
AUG - Left Alt + Left Ctrl + 5th mouse button.
FAMAS - Left Shift + Left Alt + 4th mouse button.
GROZA - Left Alt + 4th mouse button.
JS9 - Left Shift + 4th mouse button.
P90-1x - Left Shift + Left Ctrl + 4th mouse button.
P90-2x - Left Alt + Left Ctrl + 4th mouse button.
Script versions:
v5.7... - recoil reduction when pressing the left mouse button.
v5.8... - recoil reduction when pressing the right mouse button and left. If the right button is not pressed, then the left button will work in its usual mode, and recoil reduction will not occur.
Problems that happen with Logitech and how to solve them!!!
Attention! How to Avoid a Potential Ban When Using Lua Scripts.
In Warface, Lua scripts for recoil control only work with the old GHUB interface. The new interface likely uses Win32 API, which is detected and blocked by anti-cheat systems. There have already been ban cases in games like StalCraft and Delta Force. The old GHUB is safer because it uses its own driver-based solution.
Download the old, stable version here:
https://drive.google.com/file/d/1ffXNTp5iQZ8woltyIj7CKkeY6Oz6ux3x/view
After installation, disable automatic updates in the settings.
Also, for safety, do not use game-specific profiles in GHUB or Logitech Gaming Software. Use a desktop profile with the persistent attribute.
GHUB must be run with administrator privileges.
Third-party programs that can use the mouse's side buttons, such as Discord, may cause issues with running the scripts, so keep this in mind.
You should also be familiar with your mouse button numbering.
________________________________________
Скрипт – No Recoil для мышек Logitech в игре PUBG убирает вертикальную отдачу у AKM, ACE32, АУГ, БЕРИЛ, ФАМАС, ГРОЗА, М416, P90-1x и P90-2x, почти полностью. То есть повышает кучность и тем самым увеличивают дальность поражения противника. Ваша мышка должна поддерживаться программой - Logitech Gaming Software, или GHUB.
Скрипт был написан под обойму на 42 патрона, для стрельбы из положения стоя от первого лица под настройки чувствительности мыши в игре: для 1x - 50, для 2x - 47 (только для P90 с прицелом 2x), множитель вертикальной чувствительности - 1.0, FOV - 103.
Внимание!!! Есть вероятность, что по техническим причинам ("Input Lag" - влияющий на работу макросов), или при изменении FOV, или при модифицировании оружия, если прицел во время стрельбы тянет вниз, то уменьшаете значения в настройках чувствительности мыши в игре, если вверх, то увеличиваете.
Если настройки чувствительности мыши в игре слишком большие для вас, или слишком маленькие, то вы можете изменить dpi своей мыши, на работу скриптов это не повлияет.
Управление скриптом:
CapsLock – вкл/выкл скрипта. Нажмите на клавиатуре кнопку CapsLock, загорится значок CapsLock и скрипт включится. При повторном нажатии кнопки CapsLock выключает скрипт, значок CapsLock погаснет.
Включение необходимого режима убирания отдачи для оружия:
AKM - левый shift + левый alt + 5-я копка мыши.
BERYL - левый alt + 5-я копка мыши.
M416 - левый shift + 5-я копка мыши.
ACE32 - левый shift + левый ctrl + 5-я копка мыши.
AUG - левый alt + левый ctrl + 5-я копка мыши.
FAMAS - левый shift + левый alt + 4-я копка мыши.
GROZA - левый alt + 4-я копка мыши.
JS9 - левый shift + 4-я копка мыши.
P90-1x - левый shift + левый ctrl + 4-я копка мыши.
P90-2x - левый alt + левый ctrl + 4-я копка мыши.
Версии скриптов:
v5.7... - убирание отдачи при нажатии левой кнопки мыши.
v5.8... - убирание отдачи при нажатии правой кнопки мыши и левой. Если правая кнопка не будет нажата, то левая кнопка будет работать своем обычном режиме и убирание отдачи не будет.
Проблемы которые бывают с Logitech и как их решить!!!
Внимание!!! Как избежать возможного бана при использование lua-скриптов.
В Warface lua-скрипты для устранения отдачи работают только в старом интерфейсе GHUB. Новый интерфейс, вероятно, использует Win32 API и поэтому блокируется анти-читом. В таких играх как: StalCraft и Delta Force уже были случаи бана.
Старый GHUB безопаснее, т.к. использует собственное решение.
Скачать старую, стабильную версию:
https://drive.google.com/file/d/1ffXNTp5iQZ8woltyIj7CKkeY6Oz6ux3x/view
После установки отключите автоматическое обновление в настройках.
Также в целях безопасности не используйте профили для игр в GHUB и Logitech Gaming Software. Используйте профиль рабочего стола с атрибутом постоянный.
Программу GHUB надо запускать с правами администратора.
Сторонние программы которые могут использовать боковые кнопки мыши, например Discord, могут вызвать проблемы с запуском работы скриптов, учтите это.
Ещё вы должны хорошо знать нумерацию кнопок мыши.