| MAIN | SHOP | VIDEO |
ОПИСАНИЕ НА РУССКОМ НИЖЕ!!!
Attention!!!
If you are unable to make a purchase, check your email. There will be a message with links to alternative stores where you can complete your purchase.
The "No recoil" script for Logitech mice in Apex Legends removes most of the vertical recoil for the Hemlok, significantly improving accuracy and thereby increasing the effective range against opponents. Your mouse should be supported by the GHUB software.
Scripts I was are written under settings of sensitivity of a mouse in a game - 2.5, ads - 1.0.
Attention!!! There is a possibility that for technical reasons ("Input Lag" - affecting the operation of macros), or when changing the FOV, or when modifying weapons, if the sight pulls down during shooting, then reduce the values in the mouse sensitivity settings in the game, if up, then increase.
If the mouse sensitivity settings in the game are too large for you, or too small, then you can change the dpi of your mouse, this will not affect the operation of the scripts.
Script management and script versions:
"5th mouse button" - turns on the script and the ScrollLock icon on the keyboard will light up. When pressed again, it turns off the script, the ScrollLock icon will go out.
Attention!!! Shooting with recoil control using the script works as follows. After you have activated the script, first press the right mouse button and hold it down, then press the left mouse button to start shooting. To stop shooting, release the right mouse button.
Problems that happen with Logitech and how to solve them!!!
Attention! How to Avoid a Potential Ban When Using Lua Scripts.
In Warface, Lua scripts for recoil control only work with the old GHUB interface. The new interface likely uses Win32 API, which is detected and blocked by anti-cheat systems. There have already been ban cases in games like StalCraft and Delta Force. The old GHUB is safer because it uses its own driver-based solution.
Download the old, stable version here:
https://drive.google.com/file/d/1ffXNTp5iQZ8woltyIj7CKkeY6Oz6ux3x/view
After installation, disable automatic updates in the settings.
Also, for safety, do not use game-specific profiles in GHUB or Logitech Gaming Software. Use a desktop profile with the persistent attribute.
GHUB must be run with administrator privileges.
Third-party programs that can use the mouse's side buttons, such as Discord, may cause issues with running the scripts, so keep this in mind.
You should also be familiar with your mouse button numbering.
________________________________________
Макросы класса "No Recoil", то есть LUA-скрипты для мышек logitech G-серии, которые поддерживаются - GHUB, в игре Apex Legends Apex Legends почти полностью убирают вертикальную отдачу у Hemlok, то есть повышают кучность и тем самым увеличивают дальность поражения противника.
Скрипты был написаны под настройки чувствительности мыши в игре - 2.5, ads - 1.0.
Внимание!!! Есть вероятность, что по техническим причинам ("Input Lag" - влияющий на работу макросов), или при изменении FOV, или при модифицировании оружия, если прицел во время стрельбы тянет вниз, то уменьшаете значения в настройках чувствительности мыши в игре, если вверх, то увеличиваете.
Если настройки чувствительности мыши в игре слишком большие для вас, или слишком маленькие, то вы можете изменить dpi своей мыши, на работу скриптов это не повлияет.
Управление скриптами и версии скриптов:
"5-я кнопка мыши" - включает скрипт и на клавиатуре загорится значок ScrollLock. При повторном нажатии выключает скрипт, значок ScrollLock погаснет.
Внимание!!! Стрельба с убиранием отдачи с помощью скрипта работает следующим образом. После того как вы включили скрипт, то сначала нажимаете правую кнопку мыши и удерживаете её в нажатом состоянии, затем нажимаете левую кнопку мыши и начнется стрельба. Чтобы стрельба прекратилась надо отпустить правую кнопку мыши.
Проблемы которые бывают с Logitech и как их решить!!!
Внимание!!! Как избежать возможного бана при использование lua-скриптов.
В Warface lua-скрипты для устранения отдачи работают только в старом интерфейсе GHUB. Новый интерфейс, вероятно, использует Win32 API и поэтому блокируется анти-читом. В таких играх как: StalCraft и Delta Force уже были случаи бана.
Старый GHUB безопаснее, т.к. использует собственное решение.
Скачать старую, стабильную версию:
https://drive.google.com/file/d/1ffXNTp5iQZ8woltyIj7CKkeY6Oz6ux3x/view
После установки отключите автоматическое обновление в настройках.
Также в целях безопасности не используйте профили для игр в GHUB и Logitech Gaming Software. Используйте профиль рабочего стола с атрибутом постоянный.
Программу GHUB надо запускать с правами администратора.
Сторонние программы которые могут использовать боковые кнопки мыши, например Discord, могут вызвать проблемы с запуском работы скриптов, учтите это.
Ещё вы должны хорошо знать нумерацию кнопок мыши.